Moxa AWK-3121-EU Guida di Installazione Pagina 1

Navigare online o scaricare Guida di Installazione per Punti d’accesso WLAN Moxa AWK-3121-EU. Moxa AWK-3121-EU WLAN access point Manuale Utente

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
  • Pagina
    / 14
  • Indice
  • SEGNALIBRI
  • Valutato. / 5. Basato su recensioni clienti
Vedere la pagina 0
2010 Moxa Inc. All rights reserved.
Reproduction without permission is prohibited.
P/N: 1802031210013
AWK-3121
Quick Installation Guide
Moxa AirWorks
Fourth Edition, December 2010
Vedere la pagina 0
1 2 3 4 5 6 ... 13 14

Sommario

Pagina 1 - Quick Installation Guide

 2010 Moxa Inc. All rights reserved. Reproduction without permission is prohibited. P/N: 1802031210013 AWK-3121 Quick Installation Guide

Pagina 2 - Package Checklist

RS-232 Connection The AWK-3121 has one RS-232 (8-pin RJ45) console port located on the front panel. Use either an RJ45-to-DB9 or RJ45-to-DB25 cable t

Pagina 3

LED Indicators The front panel of the Moxa AWK-3121 contains several LED indicators. The function of each LED is described in the table below. LED Co

Pagina 4 - Panel Layout of the AWK-3121

Specifications WLAN Standards IEEE 802.11a/b/g for Wireless LAN IEEE 802.3u 10/100BaseT(X) for Ethernet LAN IEEE 802.3af for Power-over-Ethernet I

Pagina 5 - 52.98 [2.09"]

RX Sensitivity (for hardware revision 1.0 and 1.1): 802.11b: -92 dBm @ 1 Mbps, -90 dBm @ 2 Mbps, -88 dBm @ 5.5 Mbps, -84 dBm @ 11 Mbps 802.11g: -87

Pagina 6 - WARNING

- 14 - ATTENTION The AWK-3121 is NOT a portable mobile device and should be located at least 20 cm away from the human body. The AWK-3121 is NOT d

Pagina 7 - Grounding the Moxa AWK-3121

Overview Moxa’s AWK-3121 Access Point/Bridge/AP Client is ideal for applications that are hard to wire, too expensive to wire, or use mobile equipme

Pagina 8 - Wiring the Digital Inputs

Step 4: Use the web-based manager to configure AWK-3121 Open your computer’s web browser and then type http://192.168.127.253 in the address field to

Pagina 9 - Communication Connections

the first AWK-3121 connected to notebook A, and change the second or third AWK-3121 connected to notebook B to Client mode and then configure the not

Pagina 10 - ATEX Information

Mounting Dimensions (unit = mm) 105.00 [4.13"]134.00 [5.28"]135.00 [5.31"]45.80 [1.80"]52.98 [2.09"]198.50 [7.81"] DIN-

Pagina 11 - LED Indicators

Wall Mounting (optional) For some applications, it may be more convenient to mount the AWK-3121 to a wall, as illustrated below. STEP 1: Remove the a

Pagina 12 - Specifications

WARNING Safety First! Calculate the maximum possible current in each power wire and common wire. Observe all electrical codes dictating the maximum

Pagina 13

Wiring the Redundant Power Inputs The top two pairs of contacts of the 10-contact terminal block connector on the AWK-3121’s top panel are used for t

Pagina 14 - ATTENTION

Cable Holder Installation (Optional) You can attach the cable holder to the bottom of the AWK-3121. This helps to keep cabling neat and avoid acciden

Commenti su questo manuale

Nessun commento