Moxa AWK-1121 Guida di Installazione

 2011 Moxa Inc. All rights reserved. Reproduction without permission is prohibited. AWK-1121 Quick Installation Guide Moxa AirWorks F

- 10 - LED Indicators The front panel of the Moxa AWK-1121 contains several LED indicators. The function of each LED is described in the table below.

- 11 - Typ. 14±1.5 dBm @ 54 Mbps RX Sensitivity (for hardware revision 1.2): 802.11b: -94 dBm @ 1 Mbps, -92 dBm @ 2 Mbps, -90 dBm @ 5.5 Mbps, -8

- 12 - ATTENTION Use the antennas correctly: The 2.4 GHz antennas are needed when the AWK-1121 operates in IEEE 802.11b/g. The 5 GHz antennas are ne

- 2 - Overview Moxa’s AWK-1121 WLAN Client is ideal for applications that are hard to wire, too expensive to wire, or use mobile equipment that conne

- 3 - Step 4: Use the web-based manager to configure AWK-1121 Open your computer’s web browser and then type http://192.168.127.253 in the address fi

- 4 - Panel Layout of the AWK-1121 Top Panel View Front Panel View Rear Panel View 1. Grounding screw 2. Terminal block for PWR1 and PWR2

- 5 - Mounting Dimensions (unit = mm) DIN-Rail Mounting The aluminum DIN-Rail attachment plate should be fixed to the back panel of the AWK-1121 whe

- 6 - Wall Mounting (optional) For some applications, it may be more convenient to mount the AWK-1121 to a wall, as illustrated below. STEP 1: Remove

- 7 - Wiring Requirements WARNING Safety First! Be sure to disconnect the power cord before installing and/or wiring your Moxa AWK-1121. WARNING

- 8 - ATTENTION This product is intended to be mounted to a well-grounded mounting surface, such as a metal panel. Wiring the Redundant Power I

- 9 - Communication Connections 10/100BaseT(X) Ethernet Port Connection The 10/100BaseT(X) ports located on the AWK-1121’s top panel are used to conn