Moxa ONCELL G2110-T Manuale Utente Scaricare il pdf (Pagina 31)

OnCell G2100 SeriesI User’s Manual OnCell Configurator

3-11

ATTENTION

Use the command AT+IPR=0 to enable Autobauding. Please refer to Chapter 4 for details.

Autobauding and the +++ escape command only work with 8n1 and e71 settings. Using other

settings will disable these functions.

Stop bits can only be set to 2 only when parity is set to none.

The default parameters are 115200, 8n1, and RTS/CTS flow control.

The following instructions explain how to configure the serial communication parameters using

Wizard.

1. Connect the RS-232 port of the OnCell G2100 Series modem to a host PC. On the OnCell

G2150I, make sure the RS-232 port is connected and DIP switch 1 is set to ON.

2. Start OnCell Configurator and select the Create a new Configuration File from Wizard

option.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 104 105

Nessun commento

Moxa ONCELL G2110-T Manuale Utente Pagina 31